Operating The Oven With The Electronic Timer; Programming The Duration Of The Baking Time - Pelgrim IF960RVS Notice D'utilisation

OPERATING THE OVEN

Operating the oven with the electronic timer

Programming the duration of the baking time

The electronic timer can be used in different ways:
• You can set the duration of your baking/roasting/grilling. As soon as
the set time has elapsed, the oven will switch Off and you will hear
an audible signal.
• You can set the end time of your baking/roasting/grilling. The oven
will operate at the set temperature and function until the end time is
reached. As soon as the set time has elapsed, the oven will switch
Off and you will hear an audible signal.
• You can also enter a start and end time (for an automatic baking
process). The oven will start and stop automatically. As soon as
the automatic baking process has ended, you will hear an audible
signal.
• The electronic timer can also be used as a kitchen timer.
The kitchen timer will not switch Off the oven.
1. Select a temperature with the temperature knob and an oven function
with the function knob.
▷ The control lights of the oven and the thermostat will light up; the
oven is switched on.
2. Press and hold the 'Menu' key.
▷ A blinking bell symbol appears in the display and the time is set
to 0.00.
3. Immediately, press the 'Menu' key again.
▷ The bell symbol disappears and a blinking 'A' appears in the
display. Alternately, also 'Dur' and '0.00' appear in the display.
4. Use the - key and the + key to set the baking time.
▷ If the correct time has been set, wait for a moment. After a few
seconds you will hear an audible signal.
▷ The current time appears in the display and 'A' stops blinking.
When the set baking time has elapsed, an audible signal will sound and
the oven will switch Off automatically.
▷ The control lights of the oven and the thermostat will switch Off,
the cooking symbol disappears and 'A' starts blinking.
EN 17