Pelgrim IF960RVS Notice D'utilisation page 71

FAULTS
Induction hob
Problem
Error code
Error code F
Oven
Problem
The oven does not switch on.
The oven does not switch on
after it has been plugged in.
The oven does not heat up.
Possible cause
The control panel is dirty or
has water lying on it.
You have pressed two or more
keys at the same time.
Software failure.
Other defect
Possible cause
The oven is not set to manual
operation.
No time of day has been set.
No temperature set.
Solution
Clean the control panel.
Do not operate more than
one key at the same time.
Reset the appliance by
disconnecting it from the
power supply. Remove the
plug from the socket or
switch the automatic circuit
breaker to Off.
Contact the service
department.
Solution
Switch the oven to manual
operation (see 'Operating the
oven').
Set a time of day first (see
'Operating the oven'). The
oven is then ready for use.
Set the temperature using the
temperature knob
(see 'Operating the oven').
EN 33