Programming The End Of The Baking Time - Pelgrim IF960RVS Notice D'utilisation

OPERATING THE OVEN

Programming the end of the baking time

EN 18
5. Switch Off the audible signal by pressing any key.
6. Now, first turn the temperature knob and the function knob to '0' to
switch Off the oven completely.
7. Finally, press and hold the 'Menu' key to remove 'A' out of the
display.
▷ You can see the remaining baking time in the display at any time
by pressing and holding the 'Menu' key until the blinking bell
symbol appears. Immediately, press the 'Menu' key again.
▷ If you want to adjust the duration time, press and hold the
'Menu' key until the blinking bell symbol appears. Then,
immediately press the 'Menu' key again and after that the + or −
key to adjust the time.
1. Select a temperature with the temperature knob and an oven function
with the function knob.
▷ The control lights of the oven and the thermostat will light up; the
oven is switched on.
2. Press and hold the 'Menu' key.
▷ A blinking bell symbol appears in the display and the time is
set to 0.00.
3. Immediately, press the 'Menu' key twice.
▷ The bell symbol disappears and a blinking 'A' appears in the
display. Alternately, also 'End' and the current time appear in the
display.
4. Use the + key to set the end of the baking time.
5. If the correct time has been set, wait for a moment. After a few
seconds you will hear an audible signal.
▷ The current time appears in the display and 'A' stops blinking.
6. When the end of the baking time is reached, an audible signal will
sound and the oven will switch Off automatically.
▷ The control lights of the oven and the thermostat will switch Off,
the cooking symbol disappears and 'A' starts blinking.
7. Switch Off the audible signal by pressing any key.