Removing The Oven Door - Pelgrim OVM216GLS Notice D'utilisation

CLEANING

Removing the oven door

Keep your fingers away from the hinges of the oven door. The hinges are spring
loaded and can cause injury if they spring back. Make sure that the hinge latches
are applied correctly to lock the hinges.
1. First, fully open the door (as far as it will go).
2. Rotate the stoppers back by 90°.
3. Slowly close the door until the stoppers are aligned with the hinge beds. At the angle of
15° (relative to the closed door position), slightly lift the door and pull it out from both hinge
beds on the appliance.
To replace the door repeat these actions in reverse. If the door does not open or close properly,
make sure the hinges are positioned correctly in their slots.
EN 16