Kitchen Timer; Setting The Audible Signal - Pelgrim IF960RVS Notice D'utilisation

OPERATING THE OVEN

Kitchen timer

Setting the audible signal

The audible signal of the kitchen timer will only sound after the expiry
of the set time. The kitchen timer will not switch Off the oven.
1. Press and hold the 'Menu' key.
▷ A blinking bell symbol appears in the display and the time is set
to 0.00.
2. Use the + or − key to set the desired time.
3. If the correct time has been set, wait for a moment. After a few
seconds you will hear an audible signal.
▷ The current time appears in the display again and the bell
symbol stops blinking.
4. The time will count down automatically.
▷ When the set time has elapsed, an audible signal will sound and
the bell symbol starts blinking again.
5. Switch Off the audible signal by pressing any key.
6. Press and hold the 'Menu' key to remove the bell symbol out of the
display.
▷ You can see the set time in the display at any time by pressing
and holding the 'Menu' key.
▷ If you want to adjust the time, press and hold the 'Menu' key.
If the bell symbol starts blinking you can use the + key or - key to
adjust the time.
▷ If you want to set the time to 0, press and hold the 'Menu' key.
If the bell symbol starts blinking, press the + key and - key at the
same time.
If you have not set an oven function, you can change the audible signal
using the − key. There are three different signals.
1. Press and hold the - key and + key at the same time, until the dot
between the hours and minutes start flashing.
2. Press the 'Menu' key.
▷ 'Ton' appears in the display, together with 1, 2 or 3.
3. Press the − key.
▷ You will hear an audible signal, belonging to the number.
4. Press the − key a second time.
▷ You will hear a different audible signal.
EN 21