Manitowoc UnderCounter Q130 Serie Mode D'emploi page 18

Maintenance
F. Remove the Float Valve
• Turn the splash shield counterclockwise one or two
turns.
CAP AND
FILTER SCREEN
FLOAT
Float Valve Removal
• Pull the float valve forward and off the mounting
bracket.
• Disconnect the water inlet tube from the float valve at
the compression fitting.
• Remove the cap and filter screen for cleaning.
18
FLOAT VALVE
BRACKET
COMPRESSION
FITTING
SHUT-OFF VALVE
SPLASH SHIELD
G. Remove the Water Trough
• Apply downward pressure on the siphon tube and
remove from the bottom of the water trough.
• Remove the upper thumbscrew.
• While supporting the water trough remove the two
thumbscrews from beneath the water trough.
• Remove the water trough from the bin area.
LOWER
THUMBSCREWS
Section 4
UPPER
THUMBSCREW
REMOVE
SIPHON TUBE
Part Number 040002380 9/12