Manitowoc UnderCounter Q130 Serie Mode D'emploi page 17

Section 4
E. Remove the Water Distribution Tube
Q170/Q210/Q270 Models
1. LIFT UP
2. SLIDE BACK
3. SLIDE TO RIGHT
DISTRIBUTION
TUBE
THUMBSCREW
Q170/Q210/Q270 Water Distribution Tube Removal
• Loosen the two thumbscrews, which secure the
distribution tube.
• Lift the right side of the distribution tube up off the
locating pin, then slide it back and to the right.
! Caution
Do not force this removal. Be sure the locating pin is
clear of the hole before sliding the distribution tube
out.
Disassembly
• Twist both of the inner tube ends until the tabs line up
with the keyways.
• Pull the inner tube ends outward.
INNER TUBE
Q170/Q210/Q270 Water Distribution Tube
Disassembly
Part Number 040002380 9/12
2
3
THUMBSCREW
LOCATING
PIN
INNER TUBE
TAB
KEYWAY
Q130 Models
DISTRIBUTION
TUBE
1
Q130 Water Distribution Tube Removal
• Loosen the two thumbscrews, which secure the
distribution tube.
• Lift the distribution tube up off the thumbscrews.
Disassembly
• Twist the barbed end until the tab lines up with the
keyway.
• Pull the inner tube end outward.
Q130 Water Distribution Tube Disassembly
THUMBSCREW
TAB
KEYWAY
Maintenance
THUMBSCREW
REMOVE ICE
THICKNESS PROBE
17