Griddle - Monogram ZDP364 Manuel D'utilisation

Cuisinières au gaz naturel ou au propane professionnelles
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE RANGE

GRIDDLE

WARNING
Fire Hazard
griddle and may result in fire.
GRIDDLE SAFETY PRECAUTIONS, LEVELING
Remove the metal cover before turning the griddle on.
The griddle assembly should not be removed for cleaning.
Once the unit is in position, the griddle can be leveled.
Remove the flue cover by lifting it straight up. Be careful
not to scratch the surrounding stainless steel surfaces
during removal of the flue cover.
The two inner screws are clamping screws for securing the
griddle in place. Loosen these two screws before leveling.
Do not remove these two screws.
The two outer screws are leveling screws. Do not remove
these two screws. They can be turned to level the griddle
or to provide a forward slope to help grease and oils to
drain away from the food being cooked. After the first few
uses, you will be able to judge the slope best suited for the
foods you are cooking and personal preference.
USING THE GRIDDLE
Clean the griddle thoroughly with hot soapy water before
first use and after subsequent uses. The griddle surface is
made of durable, highly polished Type 304 stainless steel
backed by an aluminum plate for even heat distribution.
Apply a light coating of cooking oil to the griddle surface to
help prevent food from sticking.
To heat the griddle, push in and turn the control knob to
the desired temperature setting. The light on the bezel
will glow to indicate that the thermostat control is working.
The griddle is thermostatically controlled and can be set to
maintain any temperature from 200ºF to 450ºF. Permit the
griddle to preheat for 10 minutes before placing food on it.
NOTE: Unlike the surface burners which use spark
igniters, the griddle uses a hot surface igniter. Gas flows to
the griddle burner and ignites 45 seconds after the control
knob is turned to a set temperature.
49-2000877 Rev. 3
Griddle flue cover
Leveling
screws
Clamping
screws
After leveling the griddle, tighten the clamping screws to
secure griddle in place. Hand tighten screws; do not over-
tighten.
Food Item
Pancakes
Hamburgers
Bacon*
Grilled Cheese
Eggs
*NOTE: Place bacon on a cold griddle. Do not preheat.
Temperature Setting
375ºF
400ºF
400ºF
350ºF
275ºF
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zdp484

Table des Matières