CARE AND CLEANING
CONTROL PANEL AND KNOBS
It's a good idea to wipe the control panel after each use.
Clean with mild soap and water or vinegar and water,
rinse with clean water and polish dry with a soft cloth.
Do not use abrasive cleansers, strong liquid cleansers,
plastic scouring pads or oven cleaners on the control panel
because they will damage the finish.
For easier cleaning, the control knobs may be removed by
pulling them directly outwards once the knobs are in the
OFF position. Do not pull knobs up or down or hang objects
on them. This can damage the gas valve shaft. See the
Surface Burner section for a detailed view of these knobs.
The knobs can be washed by hand with soap and water.
When removing the burner knobs, remember their location.
The knobs are not interchangeable, these knobs must be
placed in the same location after cleaning. See the Surface
Burner sections for a detailed view of these knobs. To
replace knobs after cleaning, align the bottom of the knob
with the matching clip orientation to the shaft inside the
bezel. Push knob until completed seated.
BROILER PAN, GRID AND ROASTING RACK
CAUTION
Do not clean the broiler pan, grid or
roasting rack in a self-cleaning oven.
The broiler pan, grid and roasting rack are all dishwasher
safe. However, baked on foods may require washing by
38
Grid
Use a soft, non abrasive cloth to clean the inside of the
bezel. Do not remove diffuser film. Do not expose to
moisture or it will damage lighting electronics.
Flat
Side
hand with a commercial oven cleaner or abrasive deter-
gent.
Do not store a soiled broiler pan or grid anywhere in the
oven. Always properly dispose of excess grease.
Broiler pan
Front
Griddle
Flat Side
Burner Knobs
Roasting Rack
Control Panel
49-2000877 Rev. 3