Initializing The Watch - Breitling COCKPIT B50 Mode D'emploi

3. INITIALIZING THE WATCH

When used for the first time, or after having been charged, the watch guides the
user though the following sequence:
1. Pull the crown into position 2 (
function.
2. Synchronize (
display (see chapter 7.a).
3. Set the exact time on the UTC timezone (
main time base – and not the local time (see chapter 4)
4. Set the date (
SETDATE
5. Set the main TIME zone (
time (see chapter 6).
6. Press the crown back to neutral position 1.
Depending on the state of the watch prior to being charged, only some, if any,
settings will be required.
N.B.: It is only possible to adjust the minutes in one-minute increments in
In or
TIME TIME 2
UTC time and the minutes in 15-minute increments. The seconds on the other hand,
can be adjusted precisely in each of the timezones and will automatically be updated
in the other zones.
) the hour, minute and seconds hands with the digital
SyNCHRO
) (see chapter 5)
SETTIME
mode, the hours are adjusted depending on the difference with
) in order to activate the settings
PULL CROWN
), which constitutes the watch's
SET UTC
) with regard to the difference with the UTC
75
mode.
UTC