Breitling COCKPIT B50 Mode D'emploi page 91

The alarm sounds for 20 seconds, with a 10-second reminder after 2 minutes. The
upper screen displays the name of the active alarm by flashing:
be deactivated by pressing one of the two pushpieces or on the crown.
10. CHRONOGRAPH WITH INTERMEDIATE/SPLIT TIMES AND TACHOMETER (
When the
CHR ADD
0 and becomes the chronograph hand. When the chronograph mode is exited, it
returns to its usual function.
a) Measuring a single time
• Select the
CHR ADD
• Pressing P1 will start the chronograph. The upper screen displays the 1/100
a second, the lower screen the hours, minutes and seconds up to 99 hours, 59
minutes and 59 seconds.
• A second press on P1 stops the chronograph (upper screen:
with the 1/100
• A long press on P2 will put it back to zero.
The seconds hand positions itself on 0 when one goes into chronograph mode.
Should timing start before the hand is on 0, the seconds hand positions itself
directly on the active timing second.
function is selected, the seconds hand automatically goes to
function by turning the crown.
th
of a second).
90
or . This can
AL1 AL2
CHR ADD
th
alternating
CHR ADD
)
of