Breitling COCKPIT B50 Mode D'emploi page 94

f) Introducing the distance for the tachometer
To enable the tachometer to calculate the speed correctly, the distance corresponding
to the time recorded must be introduced. This setting is done as follows:
• With
CHR ADD
position 2; the upper screen will display
distance), followed by one to three letters (for the distance unit); the distance
unit flashes.
• Select the distance unit by turning the crown – see figure 2:
Distance unit
(meter)
M
(kilometer)
KM
(foot)
FT
(yard)
yD
(mile)
MI
(nautical mile)
NMI
mode stopped without displaying the speed, pull the crown into
, followed by 3 digits (for the
DIST
Corresponding speed unit
(meters per second)
M/S
(kilometers per hour)
KM/H
(feet per second)
FT/S
(yards per second)
yD/S
(miles per hour)
MPH
(knots)
KNOT
Figure 2
93