Light Intensity Setting; Parking" The Hands - Breitling COCKPIT B50 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

must give a short or long (about 2 seconds) press. If no action is associated with the
pushpieces,
will appear in the upper screen.
NOP
: indicates that the watch is in the process of calculating.
WAIT
(overflow) indicates that a counter limit has been exceeded.
OVF
d) Light intensity setting
A long press on the crown activates the light intensity setting mode. This setting
takes place by turning the crown:
will appear in the upper screen, then select
LIGHT
x
– x which represents the level from 1 to 4. The new setting must be confirmed
/4
by a short press of the crown. After 10 seconds, the watch automatically exits the
setting function.
The higher the figure, the greater the light intensity. Bear in mind that the greater
the light intensity, the more battery is used, which will result in shorter autonomy
(see chapter 2).
e) "Parking" the hands
A double press on the crown allows the hour and minute hands to be "parked" (at
09:14 or 02:47) so as not to affect the readability of the two digital displays. The
seconds hand continues to move forward as usual. In this mode, all digital functions
remain perfectly functional. A second double press is required to release the hands.
The hands are automatically "parked" when the crown is pulled out to
SETTING
mode.
67

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1884 cockpit b50

Table des Matières