Preparation For Use; Using The Chronograph - Breitling NAVITIMER RATTRAPANTE Mode D'emploi

PREPARATION FOR USE

WINDING – TIME-SETTING
1. Wind the watch through approximately 40 clockwise
turns of the crown.
2. Pull the crown out to position 2, turn it clockwise to
adjust the calendar to the day prior to the activation
date.
3. Pull the crown out to position 3. Turn the hands
forward so as to make the calendar jump once when
the hands pass through midnight. Then adjust the hour
and minute.
4. Push the crown back into position 1.
16

USING THE CHRONOGRAPH

I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph.
Hand 3 shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. The measurement is made in hours (totalizer 1),
minutes (totalizer 2), seconds and
(hand 3).
3. Reset the chronograph to zero by pressing pushpiece B.
/ of a second
1
4
17