Breitling COCKPIT B50 Mode D'emploi page 106

charge is less than 30-25%. When the battery reaches this level, the seconds hand
advances in 4-second increments.
a) " " mode
DEEP SLEEP
mode allows the battery to be disconnected from the watch's electronic
DEEP SLEEP
circuits and thus to preserve its performance (capacity). This function is useful if the
watch is not used over a relatively long period. This state is similar to one in which
the watch puts itself if it is not charged in time. The manual sleep mode setting
procedure is as follows:
• Select the
BATTERy
• Pull the crown into position 2. The upper screen displays
• Press P1 to confirm the extended stand-by period. The hands "park" immedia-
tely. Once the procedure is finished, the display goes off and the electronics
are disconnected. Following this, the pushpieces and crown are completely
inactive.
• Do not forget to press the crown back into neutral position 1.
To reactivate the watch, it must be charged using the cable supplied, and a com-
plete initialization must be performed, as described in chapter 2.
function by turning the crown.
105
.
DEEP SLEEP