Breitling COCKPIT B50 Mode D'emploi page 99

N.B.: Only one "time block" can be measured at once.
N.B.: if the flight recording remains in use for more than 99 hours and 59 minutes,
it will stop automatically and the upper screen will display
b) Rereading "block times"
Once the recording is finished, pressing P2 will automatically and successively dis-
play (3 seconds per display):
• The take-off date on the lower screen with
screen (xx being the number of the block memorized).
• The take-off time on the lower screen with
screen.
• The time of landing on the lower screen with
screen.
• Then back to the display of the flight length on the lower screen with
showing on the upper screen.
If the memory contains several blocks, P2 must be pressed successively in order to
see the parameters of the following blocks. The time of the last block is then auto-
matically displayed with xx on the upper screen.
B ADD
98
xx
B OVF
xx displayed on the upper
B DATE
xx displayed on the upper
B TKOF
xx showing on the upper
B LDG
(for overflow).
xx
B ADD