Breitling COCKPIT B50 Mode D'emploi page 98

a) Recording a "block time"
• Select the
CHRFLGT
automatically positions itself on 0 and becomes the chronograph hand. It
returns to its usual function when the "flight time' chronograph mode is
exited.
• If one or more "block times" are already memorized, a space in the memory
must be activated before starting a new recording. This operation is done by
pressing P1 for a long time: the lower screen displays --:--:--.
• Start the chronograph by pressing P1 (the upper screen displays
The lower screen displays the hours, minutes and seconds. The chronograph
seconds hand follows the digital seconds.
• Stop the recording by pressing P1 a second time (the upper screen displays
xx ). Pressing P1 again will start another recording.
B ADD
By default, the flight parameters are established in relation to the local
nevertheless possible to use UTC time as a reference; to do this, proceed as follows:
• In mode (counter stopped), pull the crown into position 2.
CHRFLGT
appears on the upper dial.
• By turning the crown, you will alternate between
reference) and
• Push the crown into neutral position 1 when the selected reference time is
indicated.
function by turning the crown; the seconds hand
(UTC time as a reference).
UTC
97
xx
B
TIME
(local time as a
TIME
).
RUN
. It is
TIME