Battery Charging; Initializing The Watch - Breitling BENTLEY SUPERSPORTS B55 Mode D'emploi

c) Battery charging
After purchasing, we recommend completely charging the battery prior to
any handling. In order to do this, the watch must be connected to the cable
supplied, following which the cable itself must be connected to the USB power
adaptor also supplied (see figure 1). The connector is equipped with a magnet
guaranteeing the contact and a mechanical alignment system. As soon as the
contact is made, the watch confirms with a beep sound and a luminous flash
on the LCD display. If the hands were stopped, they will adjust to the right time
and the word will appear in the upper screen.
CHARGE
Once the battery is fully charged, the upper screen will display
watch will give off a luminous flash. A full recharge takes around 2 hours.
Once the watch is disconnected from the charger cable (
upper screen), three things may happen:
1. The watch will function as usual and no action is required.
2. The watch was in sleep mode or not completely flat: in principle, nothing needs
to be done, but for safety's sake, the initialization procedure should be conduc-
ted in order to confirm the different states (see chapter 3).
3. The watch was completely flat and must be initialized (see chapter 3).
and the
BAT 100%
appears in the
UNPLUG
102

3. INITIALIZING THE WATCH

When used for the first time, or after having been charged, the watch guides the
user though the following sequence:
Figure 1
103