Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
the setting moving to the following day (example of the display on the upper
screen of an alarm set on all five working week days:
N.B.: Pressing P1 reactivates the seven days of the current alarm (
• Press the crown back to neutral position 1. Upon exiting setting, the alarm set is
automatically activated, and is thus in ON mode (
PM) display was selected,
N.B.: If all the days of the week are deactivated, the alarm is automatically deactivated.
On the contrary, when an alarm with no active day is turned to ON, all the days of the
week are activated.
If the alarm is not configured to sound every day, when it is activated, the upper
screen alternates
no additional indication is given.
b) Use
• A press on P2 will result in displaying the first (
after the other.
• Pressing P1 activates (
) the alarm displayed.
OFF
• A long press on P2 starts a test of the active alarm with
upper screen; a second press on P2 will stop the test.
x
AL
AM
x
with the days activated (ex:
AL
ON
x
or
AL
ON
, or respectively
AL
AL1
x
, respectively
AL
AM
89
).
MTWTF__
ALLDAyS
x
or, if the 12 hour (AM/
AL
ON
x
).
PM
; in the opposite case,
M____SS
), and second alarm (
x
) or deactivates (
AL
PM
x
displayed on the
AL
TEST
).
) one
AL2
x
AL
Publicité
Chapitres
Table des Matières
