Preparation For Use; Using The Chronograph - Breitling CHRONOMAT B01 Mode D'emploi

PREPARATION FOR USE

WINDING – TIME-SETTING
1. Unscrew the water-resistant crown counter-clockwise.
Wind the watch by approximately 40 clockwise turns of the
crown.
2. Pull the crown out to position 2, turn it clockwise to adjust the
calendar to the day prior to the activation date.
3. Pull the crown out to position 3. Turn the hands forward until the
correct date jumps into place, at midnight. Then adjust the hour
and minute.
4. Push the crown back into position 1. Press it gently, turning it
gently clockwise, then tighten it again until you feel some resis-
tance.
Do not force!
16

USING THE CHRONOGRAPH

I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3 shows the
measurement in seconds.
2. Stop the measurement by pressing pushpiece A once more.
The measurement is made in hours (totalizer 1), minutes
(totalizer 2), seconds and / of a second (hand 3).
1
4
3. Reset the chronograph to zero by pressing pushpiece B.
BREITLING | NOIR ROUGE | ME CHRONOMAT B01 CHRONOGRAPH | CA-02v-20-140607 | Format 105x85 mm
BREITLING | NOIR ROUGE | ME CHRONOMAT B01 CHRONOGRAPH | CA-02v-20-140607 | Format 105x85 mm
BREITLING | NOIR ROUGE | ME CHRONOMAT B01 CHRONOGRAPH | CA-02v-20-140607 | Format 105x85 mm
BR-ME Chronomat B01_face_v1.indd 1
17
BR-ME Chronomat B01_face_v1.indd 1
BR-ME Chronomat B01_face_v1.indd 1
07.
07.
07.