Setting The Total Running Time - Sigma SPORT PC 15.11 Mode D'emploi

Masquer les pouces Voir aussi pour SPORT PC 15.11:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5 SETTING MODE
Press the START/STOP button. The set training zone
is displayed.
Use the TOGGLE (+) button to scroll to "Individual".
Press the START/STOP button. "Lower limit" is
displayed. The registered value flashes.
Press the TOGGLE (-) button repeatedly until the
value is set to 120.
Press the START/STOP button. "Upper limit" is
displayed. The registered value flashes.
Press the TOGGLE (+) button repeatedly until the
value is set to 160.
Press the START/STOP button. The upper and
lower limits are set.
54
www.sigmasport.com
5 SETTING MODE

5.5.11 SETTING THE TOTAL RUNNING TIME

Example: You have bought a heart rate monitor and want to take the
total running time of 5 hours and 36 minutes from your training diary.
Prerequisite: Your heart rate monitor must be in setting mode.
Press the TOGGLE (+) button repeatedly to scroll
until 'Total time' appears on the display.
Press the START/STOP button. You will see zeros
below the total time. The first three digits for the
hours flash.
Press the TOGGLE (+) button five times until 5 is
displayed.
Press the START/STOP button. The last two digits
for the minutes flash.
Press the TOGGLE (+) button repeatedly until the
value is set to 36.
Tip: Hold down the TOGGLE (+) button to increase
the value quickly.
55

Publicité

Table des Matières
loading

Table des Matières