Training Mode; Lap View - Sigma SPORT PC 15.11 Mode D'emploi

4 OVERVIEW
4.5.1 SLEEP MODE
In sleep mode, only the time and date are displayed. To switch from
sleep mode to training mode, press and hold down any button.

4.5.2 TRAINING MODE

You will train in this mode.
LAP
· Laps/
intervals
TOGGLE
· Change the function
displayed
*Note: To provide you with a clearer
overview while training, the total values
are only displayed if the stopwatch is
not running.
44 www.sigmasport.com
START/STOP
· Stopwatch
TOGGLE
· Change the
function displayed
4 OVERVIEW

4.5.3 LAP VIEW

The PC 15.11 can be used for lap training. The
values for the individual laps are saved in the heart
rate monitor. You can view the values in the lap view
after and during your training.
You can only activate the lap view from the training
mode. To do this, hold down the LAP button.
In lap view mode:
Use the LAP and START/STOP buttons to navigate
and scroll through the previous laps. Press the
TOGGLE (-) and TOGGLE (+) buttons to view the
heart rate and time values for each lap.
While training, the heart rate monitor briefly shows
you a summary of the last lap for each completed lap
(briefly press the LAP button). This enables you to
directly determine whether you are close to values
you are striving to achieve (pace table, target time).
45