Editing A Scan List - Motorola HT1250.LS+ Guide De L'utilisateur

To temporarily Delete a Nuisance Channel/
Talkgroup:
1 While your radio's receiving activity is on the
nuisance channel, press and hold the Scan
button until you hear a high-pitched tone
(valid key press).
2 Release the Scan button. The nuisance
channel has been temporarily deleted from
your Scan list.
Note: In PassPort mode, you cannot delete
a priority channel/talkgroup (see
page 69), or the currently selected
talkgroup in a Scan list.
To restore a previously deleted Channel/
Talkgroup to the Scan List, restart the scan
operation or turn your radio off and on again.
Note: In PassPort mode, the talkgroup can
also be restored by scrolling through the
list, or switching the current selected
talkgroup or zone.

EDITING A SCAN LIST

Note: This feature is applicable to PassPort
Group Scan or System Scan operation
only.
One Scan list is assigned to each of the 16
positions on the Zone Selector knob. Each
Scan list can contain up to 16 talkgroups and/
or channels. The same talkgroup or channel
can be included in several Scan lists, and the
same Scan list can be assigned to several
Zone Selector positions.
When you edit a Scan list, you can either add,
delete, or prioritize talkgroups or channels.
Note: In PassPort mode, talkgroups cannot be
prioritized.
Your radio cannot receive any calls while you
are editing a Scan list. The display shows K
symbol while you are editing.
Note: In Conventional operation, even if there
is activity on a non-priority channel, your
radio automatically switches to an active
priority channel and indicates the activity
with a short tone.
67
English