Motorola HT1250.LS+ Guide De L'utilisateur page 41

5 Press the PTT button to send the Call Alert.
• While the Call Alert is being established
the blinks and the LED indicator blinks
F
red momentarily.
6 Once the Call Alert is
received and
acknowledged by the
Acknowledge
target radio, the F
displays solid and
you see:
• If the Call Alert cannot be established,
you see:
No Acknowledge
for 5 seconds. The LED indicator turns off.
• If all channels are busy while attempting a
Call Alert,
you see:
System Busy
and will hear a delayed busy tone as long
as the PTT button is pressed.
If the PTT button is kept pressed and the
system frees up a channel, the radio
automatically attempts to re-establish the
call.
• ( to end the Call Alert and revert to
talkgroup dispatch, or press the
preprogrammed Call Alert button. You can
then manually re-initiate the call. (See Step
1.)
7 ( to end the Call Alert.
39
English