Scan Advance; Removing Channels From The Scan List (Nuisance Delete Feature) - Motorola Talkabout T5900 Série Guide D'utilisation

When the radio detects activity, it stops scanning and you can hear the
transmission on that channel. To respond and talk to the person transmitting,
press within 5 seconds.
To stop scanning, briefly press and release
Note: If you press
you selected before you activated scan. If no transmission occurs within 5
seconds, scanning will resume.

Scan Advance

If the radio stops scanning on a channel you do not want to listen to, briefly press
and release

Removing Channels from the Scan List (Nuisance Delete Feature)

To prevent the radio from scanning a channel, press and hold
least 3 seconds, then release, when the scan first stops on that channel. This
temporarily removes the channel from the scan list. Press
Press a second time to activate scan again. To restore a previously deleted
channel, turn the radio off and then back on. The channel is now restored.
Note: You cannot remove your home channel from the scan list. The home
channel is the channel your radio was set to when you started the scanning.
21
while the radio is scanning, the radio transmit on the channel
or to resume scanning for the next active channel.
.
to exit scan mode.
or for at