Getting Started; Battery Information; Charging The Battery - Motorola HT1250.LS+ Guide De L'utilisateur

GETTING STARTED

BATTERY INFORMATION

Charging the Battery

If a battery is new or its charge level is very
low, you need to charge it before use.
Note: Batteries are shipped uncharged from
the factory. Always charge a new battery
14 to 16 hours before initial use,
regardless of the status indicated by the
charger.
To charge the battery, place the battery, with or
without the radio, in the charger. The charger
LED indicates the charging progress:
LED Color
No LED indication
Single green blink
Blinking red*
Steady red
24
English
Battery/Charger Status
Battery inserted incorrectly.
Successful charger power-up.
Battery is not chargeable or
not making proper contact.
Battery in rapid-charge mode.
LED Color Battery/Charger Status
Blinking yellow Battery in charger, not in
rapid-charge mode but waiting to
be charged.
† Battery 90% (or more)
Blinking green
charged.
Steady green Battery fully charged.
* Remove the battery from the charger. Clean the
battery contacts with isopropyl alcohol applied to
a soft cloth. Place the battery back in the charger.
If the LED indicator continues to blink red,
replace the battery.
†
A standard battery may require one hour to
charge to 90%.