Motorola HT1250.LS+ Guide De L'utilisateur page 107

Selecting a Trunked Zone and Talkgroup
Turn Zone Selector knob to appropriate trunked zone.
Sending a Trunked Call
1. Press PTT. If trunked system access was successful, the LED lights a steady red;
if access was unsuccessful, the LED blinks red; a low pitched tone sounds.
2. Speak clearly into microphone. Release PTT to listen.
Initial PassPort System Registration
Upon power up, the display shows the PassPort alias:
The display shows the selected talkgroup alias:
If a PassPort site cannot be immediately located, the display
shows:
On successful PassPort registration, the display shows:
(XXX = PassPort site on which you are registered).
The display shows the Selected talkgroup alias:
The alias remains on the display.
Selecting a Conventional Zone and Channel
Turn Zone Selector knob to appropriate conventional zone.
Sending a Conventional Call
Press PTT and speak clearly into microphone. The LED lights a steady red while the
call is being sent. Release PTT to listen.
Receiving a Trunked or Conventional Call
Turn Zone Selector knob to desired trunked or conventional zone. Make sure PTT is
released. The LED blinks red when a call is received.
Making a Selective Call (LTR and Conventional Operation Only)
1. From Selective Call menu, select or enter desired radio ID number.
2. Press PTT to send the call. The radio sounds a continuous tone. Press PTT and talk;
release PTT to listen.
Receiving a Selective Call (LTR and Conventional Operation Only)
When a Selective Call is received, the radio displays F and name or ID of calling radio;
the LED blinks yellow. Press PTT to answer.
(Check with your dealer for the features available with your radio.)
Record the functions for your radio's programmable buttons in the table provided below. For
PASSPORT
further information, see pages 18 and 19 in this User's Guide.
TLKGRP ALIAS
SEARCHING
REG SITE XXX
TLKGRP ALIAS
Button
HT1250•LS+ Radio
Quick Reference Card
Zone Selector Knob
On/Off Volume Knob
Side Button 1 (A)
(Programmable)
Push-to-Talk
Button
Side Button 2 (B)
(Programmable)
Side Button 3 (C)
(Programmable)
Function Short Press
Top Button (D)
(Programmable)
LED Indicator
Microphone
Display
Menu Keys
(P1, P2, P3)
(Programmable)
Keypad
Long Press Hold Down Page