Passport Signaling; Selective Call; Sending A Selective Call Using The Preprogrammed Button; Sending A Selective Call Through The Menu - Motorola HT1250.LS+ Guide De L'utilisateur

PASSPORT SIGNALING

Selective Call and Call Alert are available in
the HT1250•LS+ radio using the PassPort
protocol. As such, no third party can hear the
conversation of two users engaged in a
Selective Call. Selective Call and Call Alert are
mutually exclusive. If one of the users is
engaged in a Selective Call or Call Alert while
roaming to a different site, the Selective Call or
Call Alert will end.

SELECTIVE CALL

You can initiate a Selective Call to a particular
radio in three different ways:
• Using a preprogrammed button.
• Through the menu.
• Using the One-Touch button.
34
English
Sending a Selective Call using the
Preprogrammed Button
• Press the preprogrammed Selective Call
button (see page 20). Proceed to Step 4.
–or–

Sending a Selective Call through the Menu

1 ) to enter menu mode.
2 + or ? until
3 ) to select
The LED indicator lights a steady yellow.
The display shows and the
F
preprogrammed alias or ID of the last active
Selective Call is displayed.
4 If the unit has not
been engaged in a
Selective Call after
power-up, you see:
+ or ? to locate the desired alias or
ID in the Radio Call List.
–or–
Selective Call
Selective Call
Select User