Breitling EXOSPACE B55 Mode D'emploi page 54

8. : option of disabling the following functions:
MoDE
9. : activation and deactivation of the BLE (Bluetooth
CoNNECT
connection.
Please note that as soon as the
SETTING
position 2, the hour and minute hands "park" in order to facilitate the readability
of the two screens.
a)
SyNCHRo
The time shown on the analog display (hands) and that shown on the digital
display (screens) must be perfectly synchronized. In the event of the two displays
being completely out of synchronization (following a shock or accidental stop), the
analog display on the digital indicator is adjusted as follows:
• Select the function by turning the crown.
SETTING
• Pull the crown into position 2 (the hour and minute hands will "park").
• Select by turning the crown.
SyNCHRo
• Press P1 to activate the setting: the hands will align themselves on the digital
display on the lower screen.
• If there is an inconsistency, turn the crown to position the seconds hand at 12
o'clock and confirm by pressing P2.
, and
CHRFLGT CDCUCLK
®
Low Energy)
mode is activated by pulling the crown into
100
. • Set the minute hand, and then the hour hand, and confirm by pressing P1.
ALCU
• Press the crown back to neutral position 1.
b) ( or
TILT oN
• Select the
SETTING
• Pull the crown into position 2 (the hour and minute hands will "park").
• Select
TILT
• Press P1 to activate the setting.
• Turn the crown to select
• Confirm the setting by pressing P1 and/or pressing the crown back to neutral
position 1.
N.B.: On the lower screen, a counter indicates the number of tilts activated since
the last battery charge.
c) (
LIGHT SHoRT
• Select the
SETTING
• Pull the crown into position 2 (the hour and minute hands will "park").
• Select
LIGHT
)
oFF
function by turning the crown.
by turning the crown.
or (the default setting is
oN oFF
, or )
MEDIUM LoNG
function by turning the crown.
by turning the crown.
101
).
oFF