Breitling EXOSPACE B55 Mode D'emploi page 51

3. Set the exact time on the UTC timezone (
main time base – and not the local time (see chapter 4).
4. Set the date ( ) (see chapter 5).
SETDATE
5. Set the main TIME zone (
SETTIME
time (see chapter 6).
6. Press the crown back to neutral position 1.
Depending on the state of the watch prior to being charged, only some, if any,
settings will be required.
N.B.: It is only possible to adjust the minutes in one-minute increments in
In or mode, the hours are adjusted depending on the difference with
TIME TIME 2
UTC time and the minutes in 15-minute increments. The seconds on the other hand,
can be adjusted precisely in each of the timezones and will automatically be updated
in the other zones.
It is clear that in the event of a change of summer/winter time or the contrary,
and/or timezones must be changed, and not the
TIME 2
4. ADJUSTING THE TIME BASE OF THE wATCH (
UTC time is the watch's main time base. The minute on the time base can only
be adjusted in 1-minute increments in this mode. Any modification to UTC time
will automatically have an effect on
), which constitutes the watch's
SET UTC
) with regard to the difference with the UTC
UTC
time.
UTC
)
UTC
and (the latter being adjusted
TIME TIME 2
94
according to the difference with
in 24-hour format.
a) Setting (
SET UTC
• Select the
UTC
• Pull the crown into position 2,
begins to flash (
• Turn the crown to adjust the hours and confirm by pressing P2. The minutes will
begin to flash (
• Turn the crown to adjust the minutes and confirm by pressing P2. The seconds
mode. will begin to flash (
• Turn the crown to adjust the seconds and confirm by pressing P2.
• Press the crown back into neutral position 1.
UTC time can be found on www.breitling.com.
TIME
N.B.: When in setting mode (
from 0. The seconds counter will only stop when the seconds are changed
manually. In this case, it restarts when exiting setting (putting the crown back
to neutral position 1). The seconds are automatically synchronized with the
and zones.
TIME 2
). The display of the UTC time is only available
UTC
)
mode.
appears on the upper screen and the time
SET UTC
appears on the upper screen).
HoUR
appears in the upper screen).
MINUTE
appears on the upper screen).
SECoND
), pressing P1 will restart the seconds counter
SET UTC
95
TIME