Breitling EXOSPACE B55 Mode D'emploi page 45

3. CHR ADD: chronograph with intermediate/split times and tachymeter – see
chapter 10.
4. LAP TMR: "lap" counter chronograph to calculate lap times – see chapter 11.
5. CHRFLGT: Recording "block times" and/or "flight time", by memorizing the
start, take-off, landing and stop times, as well as the date of the flight and
take-off and landing airports – see chapter 12.
6. CDCUCLK (CountDown CountUp CLocK): countdown followed by "long term"
chronograph or MET (Mission Elapsed Time) – see chapter 13.
7. ALCU: alarm connected to the mission (MET) chronograph – see chapter 14.
8. TIMER: countdown – see chapter 15.
9. TIME 2: second timezone, can easily be exchanged with the main TIME zone –
see chapter 16.
10. UTC: reference time of the watch that must correspond to the UTC time – see
chapter 4.
11. NOTIFY: if the watch has been paired with a smartphone, the option exists of
receiving notifications of incoming phone calls, messages and emails on the
watch. In addition, the time of the next meeting taking place during the day
can be displayed – see chapter 17.
82
12. SETTING: various settings that make it possible to configure and personalize the
watch – see chapter 7.
13. BAT: Battery charge status indicator – see chapter 18.
The three functions, CHRFLGT, CDCUCLK and ALCU, can be temporarily
masked if not required (see chapter 7.h).
c) User interfaces
The watch has 3 central hands (hours H, minutes M and seconds SEC) as well as
2 digital displays: upper screen at 12 o'clock (consisting of 7 alphanumeric digits
) and lower screen at 6 o'clock (6 digits
███████
The different functions are selected by turning the crown.
The latter shows two stable axial positions:
– neutral 1 (to change functions)
– pulled out 2 (for settings)
– as well as an unstable position 0
(which acts as a pushpiece,
notably to light up the digital displays).
: : ).
88 88 88
83