Breitling EXOSPACE B55 Mode D'emploi page 47

g) Connecting the watch to a smartphone
The watch is equipped with a BLE (Bluetooth
it to be paired with an Apple iPhone
dedicated application on the smartphone, it is possible to adjust all the settings,
including the time as well as recovering certain information from the CHR ADD,
the LAP TMR and the CHRFLGT. It is also possible, when connected, to display
notifications of phone calls (caller name or number), messages and emails
received on the smartphone; the watch can also indicate reminders of meetings
stored on the smartphone.
If necessary, updating of the watch's firmware is also possible. The configuration is
described in chapters 7.i and 17.
2. RECHARGEABLE BATTERY AND POwER MANAGEMENT
a) Rechargeable battery
The watch is powered by a rechargeable Li-ion battery. Charging takes place
through two contacts located at 9 o'clock, on the side of the case, by using a spe-
cial cable supplied with the chronograph. The connector consists of an integrated
magnet that ensures the contact with the watch.
N.B.: Please take care not to short-circuit the two contacts on the recharging cable
and in particular, never place the ends of the cable on metallic surfaces.
®
Low Energy) antenna enabling
® or Android™ type smartphone. Using a
86
60
50
40
30
20
10
0
1 2
Graph 1: Typical autonomy in number of days for 10 minutes use of the light and 10 seconds per
day of alarm (vibrate function and buzzer) with or without a connection and 20 notifications,
according to the light intensity setting.
Connection OFF
Connection ON
Connection ON + Noti cations
3 4
Intensity control
87