Kollmorgen SERVOSTAR 300 Serie Manuel page 60

S300 Product Safety Guide | 2 English
If communication works, you see the start screen. Select "Setup Wizard" in the navigation
frame.
2.7.3.5 Important Screen Elements
Help Function
The
with.
Key F1
Menu Bar ?
Tool Bar
Status Bar
The status bar shows a green Online symbol, indicating that the communication works.
2.7.3.6 Setup Wizzard
The Setup Wizard leads you through the necessary steps for configuring your servo amplifier.
Depending on the selected application, only the active screen pages are necessary.
More setup information see Instructions Manual.
60 Kollmorgen | kdn.kollmorgen.com | November 2018
Online Help gives detailed information to all parameters the servo amplifier can work
Starts Online Help
Starts Online Help
Context Help. Click the help symbol first. Then click the function for which you
need help.
Save to EEPROM, required if you changed parameters.
Reset, required if you changed configuration parameters.
Operation Mode, use "0: Digital Velocity" mode for drive test-
ing.
for the actual screen page.
with the table of contents page.
Make sure, that the amplifier
is disabled (Input Enable con-
nector X3 pin 12 must be 0 V
or open)!