DBI SALA TALON 3101000 Manuel D'instructions page 17

7.2 PHYsIcal sPecIfIcatIons:
8 foot MoDels:
• Overall Dimensions, Quick-Connect Attachment Handle
Models (LxWxH): 6.7 x 3.9 x 2.2 in. (17 cm x 10 cm x 6 cm)
• Overall Dimensions, Order Picker Attachment Handle
Models (LxWxH): 8.9 x 3.9 x 2.2 in. (23 cm x 10 cm x 6 cm)
16 foot MoDels:
Overall Dimensions (LxWxH): 7.9 x 5.9 x 2.4 in. (20 cm x 15 cm x 6 cm)
all MoDels:
Materials:
Housing: Nylon
Cable Drum: Glass filled nylon
Internal Components: Steel/Aluminum
Lifeline: 3/4 inch nylon web
7.3 Patents anD reQUIreMents:
•
•
8.0 TERMINOLOGY
AUTHORIZED PERSON: A person assigned by the employer to
perform duties at a location where the person will be exposed to
a fall hazard (otherwise referred to as "user" for the purpose of
these instructions).
RESCUER: Person or persons other than the rescue subject acting
to perform an assisted rescue by operation of a rescue system.
CERTIFIED ANCHORAgE: An anchorage for fall arrest, positioning,
restraint, or rescue systems that a qualified person certifies to
be capable of supporting the potential fall forces that could be
encountered during a fall or that meet the criteria for a certified
anchorage prescribed in this standard.
QUALIFIED PERSON: A person with a recognized degree or
professional certificate and with extensive knowledge, training, and
experience in the fall protection and rescue field who is capable of
designing, analyzing, evaluating and specifying fall protection and
rescue systems to the extent required by this standard.
COMPETENT PERSON: One who is capable of identifying existing
and predictable hazards in the surroundings or working conditions
which are unsanitary, hazardous, or dangerous to employees,
and who has authorization to take prompt corrective measures to
eliminate them.
Patents Pending
Meets ANSI Z359.1 and OSHA requirements
17