Publicité
Les langues disponibles
Les langues disponibles
the fold torn apart,
the SRL has been
impacted and must
be removed from
service and returned
to an authorized
service center for
repair.
4.0
TRAINING
4.1
It is the
responsibility of
all users of this
equipment to
understand these
instructions, and
to be trained in
the correct installation, use, and maintenance of this equipment.
These individuals must be aware of the consequences of improper
installation or use of this equipment. This user manual is not a
substitute for a comprehensive training program. Training must be
provided on a periodic basis to ensure proficiency of the users.
WARNING: Training must be conducted without exposing the trainee
to a fall hazard. Training must be repeated on a periodic basis.
5.0
INSPECTION
5.1 The i-Safe™ RFID tag on this
SRL can be used in conjunction
with the i-Safe handheld reading
device and the web based
portal to simplify inspection and
inventory control and provide
records for your fall protection
equipment (see Fig. 11).
5.2 FREQUENCY:
•
OSHA 1910.66, OSHA
1926.502 and ANSI Z359.1
requires an inspection of
equipment before each use.
See sections 5.2, 5.3, and
5.4 for inspection guidelines.
•
the SRL be completed by a competent person other than the
user. More frequent inspections by a competent person may
be required based on the nature and severity of workplace
conditions affecting the equipment and the modes of use and
Before Each Use:
Annually: ANSI Z359.1 requires a formal inspection of
Figure 10 - Impact Indicator
figure 11 - rfID tag
14
i-Safe RFID
Tag
Publicité
