Manual Operations; Semi-Automatic Program Operation - Irritrol Rain Dial-R Guide De L'utilisateur

F Manual Operations

Semi-automatic Program Operation

Semi-Automatic Program operation enables an automatic Program
watering cycle to be started manually at any time . Once running,
the manual advance feature enables you to step through the pro-
grammed station sequence .
1 . Place the Function switch in the Run position .
2 . Turn the Dial to the Current Time position .
3 . Place the Program switch to select A, B or C .
4 . Press the Semi-Auto button to start the watering cycle .
Note: Once started, the station sequence can be manually
advanced by placing the Dial to Current Time and pressing the
Manual button.
Note: The Manual Advance feature applies to all Automatic,
Semi-automatic and Station Test watering operations for the
selected Program.
Note: To terminate watering operations, place the Function
switch momentarily in the OFF or Stop position.
32