Connecting A Remote Control Unit (Optional) - Irritrol Rain Dial-R Guide De L'utilisateur

Connecting a Remote Control Unit (optional)

The Rain Dial-R controller is remote-ready and is fully compatible
with both Irritrol Handheld Remote Control models: the close-range
residential model KSR-KIT-K, and the long-range commercial model
CMR-1-KIT . Both handheld remote systems offer similar control fea-
tures . Refer to the user guide provided with each remote kit for com-
plete information .
As shown in the illustration below, the KSR-KIT-K receiver plug
assembly simply plugs into the receptacle provided in the back of the
Rain Dial-R control module . The CMR-1-KIT receiver plug assembly
also requires connection to the 24 VAC power terminals .
Note: The receiver plug assembly of the two remote models look
similar, but are not interchangeable.
Figure 6
CA-03 Receiver Plug
for KSR-KIT Remote
EARTH
7 8 9 10 11 12 VC
GROUND
1 2 3 4 5 6 MV/
Pump
24 VAC
+ -
Sensor
CMR-CC Receiver Plug
for CMR-1-KIT Remote
13