Basic Programming Procedures; Setting The Current Time And Day; Setting The Valve Run Time Duration - Irritrol Rain Dial-R Guide De L'utilisateur

F Basic Programming Procedures

Setting the Current Time and Day

1 . Place the Function switch in the Set Programs (center) position .
2 . Turn the Dial to the Current Time position .
3 . Press the
Note: When using the
adjust in steps, or press and hold to scroll.
4 . Turn the Dial to the Today position .
5 . Press the
Note: If Odd/Even schedule or Monthly Water Budget is used, the
current day of the week is preset and cannot be changed.
6 . Return the Dial to the Current Time position .
7 . Return the Function switch to the Run position .
Note: The flashing colon (:) indicates AC power is present. If the
colon is not flashing, the controller is operating on battery power only.

Setting the Valve Run Time Duration

Each valve station can have an individual run time assignment in
each Program . Run time can be set for 1–59 minutes (in 1-minute
increments) or 1–5 .9 hours (in 1/10-hour increments) .
1 . Place the Function switch in the Set Programs (center) position .
2 . Select Program A, B or C .
3 . Turn the Dial to select the valve number .
4 . Press the
5 . Repeat steps 3 and 4 for all valves to be assigned to the selected
Program .
6 . Repeat steps 2–5 for each Program as needed .
7 . When finished, return the Dial to the Current Time position .
8 . Place the Function switch in the Run position .
22
or button to set the current time (note AM/PM) .
or
or button to select the current day (abbreviation) .
or button to set the valve run time duration .
button, press and release to