Stack/Overlap - Irritrol Rain Dial-R Guide De L'utilisateur

6 . Press the Manual button one time to select the calendar Month
setting . January (JA) will be displayed .
7 . Press the
JA - January (1), Fe - February (2), MR - March (3), AP - April (4),
My - May (5), JN - June (6), JL - July (7), AU - August (8),
SE - September (9), OC - October (10), nO - November (11)
and DE - December (12) .
8 . With the month selected, press the Manual button one time to
select the Day setting .
9 . Use the
For example, April 4 would be displayed as A:04.
10 . Press the Manual button one time to select the Year setting .
11 . Press the
12 . Press the Manual button (as needed) to select
the Monthly Water Budget display . 1 (January)
is selected with its current Water Budget value
(100% by default) .
13 . To change the month selection, press the
Manual button .
14 . Press the
down or up (Off or 10%–200%) .
15 . Repeat steps 13 and 14 to set additional months .
15 . When finished, return the Dial to the Current Time position .
16 . Return the Function switch to the Run position .

Stack/Overlap

The Stack/Overlap option determines how the controller will manage
concurrently scheduled programs or manually started valve stations .
By default, the Overlap option is selected, enabling simultaneous
operation of up to three Programs or manual valve stations . Selecting
the Stack option limits operation to either one automatic Program or
manual valve station .
28
or button to select the current month abbreviation:
/ buttons to select the current calendar day .
/ buttons to select the current year (09 = 2009) .
buttons to adjust the % factor in 1% increments
/