What The Display Indicates - Irritrol Rain Dial-R Guide De L'utilisateur

Wh at the Display Indicates
F
The following examples represent the display information provided to
assist you within the various programming, setup and operating modes .
Programming Mode
• Current Time - Displays the current time of day .
• Valve Run Times - Displays the run time set for a
selected valve number . Will indicate 01–59 minutes,
1 .0–5 .9 hours or Off .
• Start Times - Displays start time(s) assigned to the
selected Program .
• Today - Displays the current day within a Weekday
schedule, e .g . Su, Mo, etc ., or Skip Days schedule
day (1–31) .
• Schedule - Displays ON or OFF for each day in
a Weekday schedule . When using an Odd/Even
schedule, Odd, Even or OFF will be displayed for
each station . When using a Skip Days schedule,
Once Every (01–31) will be displayed .
• Special Functions (Dial – Special Functions)
•• Station Test Cycle - All active station numbers
will be shown at the top of the display . T:01–10
indicates minutes of run time selected for test
cycle .
•• Water Budget (Per Program) - Displays the cur-
rent Water Budget % or OFF . If a Monthly Water
Budget is in use, (– – –) will be shown .
•• Clear Program Memory - CLr indicates the
Clear Program Memory function is selected .
•• Well Recovery Time - Indicates the delay time
(00–59 seconds, 1–59 minutes or 1– 2 hours) set
to occur between stations in a watering cycle .
20
(Function – Set Programs)
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2