Clear Program Memory - Irritrol Rain Dial-R Guide De L'utilisateur

Clear Program Memory

F
The Clear Program Memory feature enables you to safely clear the
automatic watering program settings defined for a specific Program
without affecting any remaining Program information . The memory
erase function applies only to the specified Program, leaving the
remaining Programs intact .
Important: The "Clear Program" function completely erases
all user-defined programming information from the selected
Program including: start times, run times, and watering day
schedule .
Note: To return the Program back to factory default settings, refer
to "Reset Factory Default Programming" on page 35.
1 . Place the Function switch in the Set Programs position .
2 . Place the Program switch to select A, B or C .
3 . Turn the Dial to the Skip Days - Special Functions position .
4 . Press the Manual button repeatedly to display CLr (Clear) .
5 . Press the
CL? (Clear?) .
6 . To complete the process, press the
the prompt "End" .
7 . Return the Dial to the Current Time position .
8 . Return the Function switch to the Run position .
34
button one time . The display will show the prompt:
button again to display