Overview: Control Module Interface - Irritrol Rain Dial-R Guide De L'utilisateur

Overview: Control Module Interface

1 - Program Switch
• Three-position slide switch used to select Program A, B or C
for setup, program review and manual operation .
2 - LCD
Display
• High-contrast LCD panel displays all controller programming
and operating information .
3 -
Plus and Minus Buttons
• Push buttons used to increase and decrease display values
during controller setup, programming and manual operations .
Adjusts values incrementally (press and release) or by rapid
scrolling (press and hold) .
4 - Dial
• A 25-position rotary switch used to select stations, start times,
watering days and special functions for setup, programming
and manual operations .
5 - Manual Button
• Push button used to start and control manual operations
by station . Also serves as a "Next" button to step forward
through various setup, programming and manual operations .
6 - Function Switch
• A three-position slide switch used to select one of three
controller function modes:
Off or Stop - Stops all current watering operations, and
prevents all automatic and manual operations .
Set Programs - Enables automatic watering program setup
values to be selected and changed .
Run or Manual - Normal switch position for all automatic and
manual watering operations .
7 -
Semi-Auto Start Button
• Push button used to manually start an automatic watering
Program . Also used to initiate the Station Test Run operation .
6