Manual Operation - Irritrol Rain Dial-R Serie Guide Rapide De Démarrage

Note: The Manual Advance feature applies to all Automatic, Semi-automatic and Station
Test watering operations for the selected Program.
Note: To terminate watering operations, place the Function switch momentarily in the
OFF or Stop position.
Manual Station Operation
Manual station operation provides manual control at the individual station level and provides
the following four control options:
• Station(s) can be operated for a one-time run duration without altering the station's set
run time in an automatic Program.
• Operation can be limited to only one station running manually or set to allow three
stations to run at the same time.
• Works with the Manual Advance feature to move up through the station sequence.
1. Place the Function
switch in the Run
position.
2. Turn the Dial to the
Station Number to be
manually operated.
3.
Use the
buttons to set a manual
operation run time
ranging from
1 minute to 5.9 hours.
Press the Manual
4.
button to start the
operation.
Note: Depending upon the Stack/Overlap setting, additional
stations selected (beyond the one or three option setting) will register as OFF when
entered with the Manual button. However, they will be placed (stacked) in the manual
sequence to run.
Note: Once started, the station sequence can be manually advanced
by pressing the Manual button.
Note: To terminate manual watering operations, place the Function switch momentarily
in the OFF or Stop position.
5. If this is the only station to be run
manually, skip step 6 and
continue at step 7 below.
6. To add additional stations to the
manual run operation, repeat steps 2
through 4 as needed, then continue
at step 7.
7.
/
Turn the Dial to the
Current Time position.
11