TECO 36 Special Manuel D'utilisation page 106

Turntable stops under strain, but the motor is running
Insufficient belt tension.
➥ Adjust belt tension or replace it.
Turntable fails to clamp rims
Faulty turntable cylinder.
➥ Replace the turntable cylinder.
Tips of locking wedges are worn.
➥ Replace the locking wedges.
Control pedals do not return to their position
Pedal return spring broken.
➥ Replace the spring.
Bead breaker cylinder lacks force, fails to break beads and
leaks air
Silencer plugged.
➥ Replace the silencer
Cylinder seals worn.
➥ Replace the seals.
➥ Replace the bead breaker cylinder.
After clamping, the tool head does not rise or rises too far
from rim
lamping plate not adjusted.
➥ Adjust the plate.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥ Replace the pressure gauge.
The lubricator does not work
No oil in lubricator.
➥ Top up lubricator with SAE20 non-detergent oil.
Lubricator broken.
➥ Replace the lubricator
106 User's manual