The prosthetic feet have a functional ring. The functional ring absorbs vertical impact loads and
enables slight torsional movements.
The Taleo Harmony is additionally equipped with a mechanical vacuum pump.
While walking, the vacuum pump is compressed and released again, thus generating the vacu
um. The elevated vacuum in the prosthetic socket improves the connection between the user and
the prosthesis.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular connectors. Func
tionality with components of other manufacturers that have compatible modular connectors has
not been tested.
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro
priate modular connectors.
The product is recommended for mobility grade 2 (restricted outdoor walker),
mobility grade 3 (unrestricted outdoor walker) and mobility grade 4 (unrestricted
m°
outdoor walker with particularly high demands).
kg
The table that follows shows the suitable spring stiffness of the prosthetic foot, matching the
patient's body weight and activity.
Body weight [kg]
2.3 Environmental conditions
Storage and transport
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative humidity 20 % to 90 %, no mechanical
vibrations or impacts
Allowable environmental conditions
Temperature range: –10 °C to +45 °C (14 °F to 113 °F)
Moisture: relative humidity: 20% to 90%, non-condensing
Chemicals/liquids: fresh water as dripping water, occasional contact with salty air (e.g. near the ocean)
Solids: dust
Spring stiffness relative to body weight and activity level
up to 51
52 to 58
59 to 67
68 to 77
78 to 88
89 to 100
101 to 115
116 to 130
131 to 150
Normal activity level
1
2
3
4
5
6
7
8
9
High activity level
2
3
4
5
6
7
8
9
–
17