Eu-Declaration Of Conformity - BUSCH COBRA NC 0100 B Supplément Au Manuel D'installation Et De Maintenance

EU-Declaration of Conformity

This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the Busch scope of delivery. This
declaration of Conformity is issued under the sole responsibility of the manufacturer. When this machine is integrated into a superordinate
machinery the manufacturer of the superordinate machinery (this can be the operating company, too) must conduct the conformity assessment
process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer:
Notified body for type examination
IBExU Institut für Sicherheitstechnik GmbH
Fuchsmühlenweg 7
09599 Freiberg
Germany
NB No 0637
declares that the machine(s) NC 0100 B, CE type examination certificate IBExU 04 ATEX 1122 X
NC 0200 B, CE type examination certificate IBExU 04 ATEX 1212 X
NC 0300 B, CE type examination certificate IBExU 04 ATEX 1026 X
with serial number
"Machinery" 2006/42/EC
–
"ATEX Directive" 2014/34/EU
–
"Electromagnetic Compatibility" 2014/30/EU
–
"RoHS" 2011/65/EU
–
and following the standards:
Standard
EN ISO 12100:2010
ISO 13857:2019
EN 1012-1:2010
EN 1012-2:1996 + A1:2009
EN ISO 2151:2008
IEC 60204-1:2016
IEC 61000-6-2:2016
IEC 61000-6-4:2018
(1)
EN ISO 13849-1:2015
EN 12874:2001
EN 13463-1:2009
EN 13463-5:2011
EN 1127-1:2019
Person authorised to compile the technical file:
Chevenez, 06.05.2021
Christian Hoffmann, General Director
(1) In case control systems are integrated.
NC 0100...0300 B, Cat. 1
0870549526 (En/ De/ Fr)
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
Notified body for production quality assurance
Ineris
Parc Technologique Alata
F-60550 Verneuil-en-Halatte
France
NB No 0080
has (have) been manufactured in accordance with the European Directives:
Title of the standard
Safety of machinery - Basic concepts, general principles of design
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower limbs
Compressors and vacuum pumps - Safety requirements - Part 1 and 2
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Electromagnetic compatibility (EMC) – Generic standards. Immunity for industrial environments; Part 1 and 3
Electromagnetic compatibility (EMC) – Generic standards. Emission standard for industrial environments
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
Flame arresters - Performance requirements, test methods and operating limits (A review against EN ISO 16852:2016 which is
harmonized shows no significant changes relevant to this equipment so EN 12874:2001 continues to represent "State of the
Art")
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic methodology and requirements (A review against
EN ISO 80079-36:2016 which is harmonized shows no significant changes relevant to this equipment so EN 13463-1:2009
continues to represent "State of the Art")
Non-electrical equipment for potentially explosive atmospheres - Part 5: Protection by constructional safety "c" (A review
against EN ISO 80079-37:2016 which is harmonized shows no significant changes relevant to this equipment so
EN 13463-5:2011 continues to represent "State of the Art")
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
Gerd Rohweder
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
EU-Declaration of Conformity
Seite/ Page/ Page 21