Eu-Declaration Of Conformity - BUSCH COBRA NC 400 B Supplément Au Manuel D'installation Et De Maintenance

EU-Declaration of Conformity

This EU-Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the Busch scope of delivery. This dec-
laration of Conformity is issued under the sole responsibility of the manufacturer. When this machine is integrated into a superordinate machinery
the manufacturer of the superordinate machinery (this can be the operating company, too) must conduct the conformity assessment process for the
superordinate machine or plant, issue the EU-Declaration of Conformity for it and affix the CE-mark.
The manufacturer:
declares that the machine(s) NC 0400 B
with serial number
has (have) been manufactured in accordance with the European Directives:
"Machinery" 2006/42/EC
–
"ATEX Directive" 2014/34/EU for use in potentially explosive areas according to classification written on the machine nameplate
–
"Electromagnetic Compatibility" 2014/30/EU
–
"RoHS" 2011/65/EU + Commission delegated directive (EU) 2015/863, restriction of the use of certain hazardous substances in electrical and
–
electronic equipment
and following the standards:
Standard
EN ISO 12100:2010
EN ISO 13857:2008
EN 1012-1:2010
EN 1012-2:1996 + A1:2009
EN ISO 2151:2008
EN 60204-1:2006 + A1:2009
EN 61000-6-2:2005
EN 61000-6-4:2007 +
A1:2011
EN ISO 13849-1:2015 (1)
EN ISO 80079-36:2016
EN ISO 80079-37:2016
EN 1127-1:2011
Person authorised to compile the technical file:
Chevenez, 15.05.2019
Christian Hoffmann, General Director
(1) In case control systems are integrated.
Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
Title of the standard
Safety of machinery - Basic concepts, general principles of design
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower limbs
Compressors and vacuum pumps - Safety requirements - Part 1 and 2
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Electromagnetic compatibility (EMC) – Generic standards. Immunity for industrial environments; Part 1 and 3
Electromagnetic compatibility (EMC) – Generic standards. Emission standard for industrial environments
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design and 2
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and
requirements
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of
protection constructional safety "c", control of ignition source "b", liquid immersion "k"
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
Gerd Rohweder
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg