P9 Setting The Time Interval For The Coloured Light - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

P9 Setting the time interval for the coloured light

This programming option gives you the option of automatically setting the length of time each
collour is on. The fefault is one minute.
You can set on-time to between 1 and maximum 10 minutes..
For shining period adjustment please press
„Mode" button.
Afterwards the „ „ button until in the display
the colour light symbol and „P9" appears.
Please confi rm with the „Mode" button.
Please chose the wished value with the „
„ and „ „ buttons.
Please confirm with a long press on the
„Mode" button until the new value is fl ashing
on the display.
Afterwards the displays shows „P6" for
short time. Shining period is now fi xed with
the new value.
66
00:02
00:05
00:05
GB
P 9