P4 Humidity Setting - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

P4 Humidity setting

The humidity is set by the factory to a value
of 60%
- if a humidity sensor is installed and acti-
vated the desired, relative air humidity is
set in % (target value).
- if no humidity sensor is installed or it is
deactivated the value set – and displayed
– indicates a time pulse value (e.g. 80%
= vaporiser is switched on for 4 minutes
and off for 1 minutes)
For humidity intensity adjustment please
press „Mode" button.
Afterwards the „ „ button until in the display
the humidity symbol and „P4" appears.
Please confi rm with the „Mode" button.
Please chose the wished value with the „ „
and „ „ buttons.
Please confirm with a long press on the
„Mode" button until the new value is fl ashing
on the display.
Afterwards the displays shows „P4" for
short time. Humidity intensity is now fi xed
with the new value.
If you changed the setting during operation,
the display now alternates between current
time, remaining running time and the set
humidity level.
60
P
GB
4
60
80
80