F2 Programming The Reheating Period After Humid Operation - EOS EMOTEC HCS 9003 Instructions De Montage Et D'emploi

F2 Programming the reheating period after humid operation

The heating time limiter is fi xed at 6 hours.
For pre heating time adjustment please
press „Mode" and „ " button synchron.
(In the display appears „F1" and the clock
symbol.) Afterwards press „ „ button until
„F2" in the display appears.
Please confi rm with the „Mode" button.
Please chose the wished value with the „
„ and „ „ Please chose the wished value
with the
Please confirm with a long press on the
„Mode" button until the new value is fl ashing
on the display.
Afterwards the displays shows „F2" for short
time. The post heating time is now fi xed with
the new value.
F
F
00:30
00:20
00:20
GB
1
2
51